Building a trunk is not impossible for those who have time, the needed spare parts and a minimum of manual dexterity.

In this post, we have listed all the elements necessary for the making of a trunk.

We advise you to buy poplar plywood.

You will be careful to assemble the whole of it with white glue and standard casing nails.

Once your box and lid created, the construction of your trunk can begin.

You will find below a list of all the elements necessary for your project.

All the presented items can be found in our spare part online shop

1  With coating fabric

Malle_goyard____details_poignes

You will find a chocolate canvas available in our online shop: CANVAS

To calculate the necessary surface:. it is the same as the surface of wood

that you have used with about 20% more for rolled edges.

2  With lozine bindings

P1150432

We supply 150 cm strips of lozine already cut with width 5cm  LOZINE

Lozine is a semi-supple product, rotproof and water-resistant.

You will have to paint it (2 coats + matt varnish, which enables to choose the color you wish.

You can also opt for leather, but this requires a higher skill, dye for edges, and hides with dimensions compatible with your trunk dimensions.

Remember that you need lozine for:

- the 4 vertical edges of the trunk

- the 4 horizontal edges of the trunk

Generally we do not put binding on the back edges.

Thus, a 100x50x50 cm trunk will require at least 5 meters of lozine + around 10% for rolled edges (top and bottom).

Holes have to be punched in the bindings before putting the 8mm steel or 11mm brass nails.

Nails are sold by 100 at a time, but remember that generaly on a 100cm binding, you place a nail every centimeter, and on both sides, which makes 200 nails per meter.

You can put only 100 nails a meter if you place them every 2 cm.

For instance: Goyard 1 cm, Vuitton around 1.5 cm; Moynat, Aux Etats-Unis, etc.: other spaces.

3  With reinforcing slats

Slats are supplied already sanded   SLATS

Malle_goyard____dessus
Example of beech slats

They are made of beech wood like on most trunks made by great historical brands.

You can either varnish them, or stain, wax, paint them according to your wish.

They are also beveled.

3  With jewelry

Jewelry is the term used to refer to the hardware.

1  The lock

A beautiful lock is the signature of your trunk.

We have created an up-market solid brass lock.

Specially made for us, this item is an exclusive. .Up-market lock

We also propose  a new lock from an ancient stock

thumb__DSC1635

The "crapauds"  (clasps)

_DSC1646

Proposed in various qualities and dimensions, depending on your project.

- Luxury clasps

Clasps are present in our catalogue in 8 different sizes, steel, brass, golden...

For you to choose according to your project, your taste and your budget 

3  The corners  ( 12 types of corners )

_DSC1555

Corners exist in 24, 30, 40 or 50mm (dimensions of the edges).

Generally, 50mm corners are used for wardrobe trunks or large trunks.

The 40mm ones for steamer trunks.

The 30 and 24mm ones for suitcases..

They can be solid brass, golden metal or nickel-plated steel.

4 Angle brackets for slats

_DSC1580

Angle brackets enable to fix and protect the wooden slats.

They are available already bent or not, depending on the models.

The solid brass standard model has 3 holes.

We put one angle bracket at each end of the slats, which means 16 angle brackets per trunk generally.

5 Angle brackets for lids

_DSC1553

To be used if your project  includes a valance (strip surrounding the lower portion of the lid).

They fold half-and-half, contrary to the ones for the slats.

They are available with oval or rectangular shape.

For suitcases, small models exist too.

6  The hinges

_DSC1604

Hinges are essential to the good opening/closing of your trunk.

On a 100cm trunk, allow 3 hinges.

7 The castors for the bottom

_DSC1548_DSC1601

Either castors or rounded feet will enable your trunk no to scratch the floor and not to have humidity.

8 The label holder

The label holder will be positioned on the side of the trunk or even on both sides sometimes.

9  The lid stay

063__petit__compas_de_coffret__laiton_longeur_110_mm_largeur__8_mm

It enables to keep the trunk open.

10  Handles

1  Leather

P1150425_DSC1568

A trunk handle is positioned with 2 brackets.

A common mistake consists in ordering 1 pair of handles and 1 pair of brackets when 2 are required.

2  Metal

013_Poignes__laiton__largeur__plaque__110_mm_X__50_mm

Metal handles are mounted directly on the trunk coating.

12 Accessories

Strap buckles

P1150437

4 The nails

famille_clous

Nail products are a very important part in building a trunk.

Contrary to what many people imagine, you cannot build a trunk with upholstery tacks.

There are 2 reasons for that. On the one hand, they are too short and on the other hand they are made of steel and break when twisted.

To build a trunk, you need:

- long nails (for slats, for instance, since they must cross the slat and the box, before being bent over)

- nails annealed (to be bent over)

P1150411

27mm long and 8mm diameter nails made of annealed brass 

- nails that can be riveted (lock, handles, clasps)

in 30 nails

- small nails, for interior padding for instance

P1150417

P1120504

Example of padding with tacks